Fuel Injection Specialties
Telephone - 210-654-0774
FAX - 210-654-1444
PERFORMANCE OPTIONS
- Vortech Superchargers
- Accel Engine Management
- Hypertech Performance Parts
- Holley Performance Products
- GM Performance Parts
- Air Filter
K&N Washable Air Filter. Mounts direct to throttle body. Has chrome trim and
Looks Great!
- Throttle Cable
OEM Camaro / TA Cable. Snaps into Throttle cable Bracket.
- Transmission Kickdown cable
OEM (700R4). Snaps into Throttle Cable Bracket and connects to transmission.
- OEM Fuel Lines and bracket cable
Extends Fuel Lines from the fuel rail to left front of engine (just forward
of valve cover). Attaches to exhaust manifold stud.
- Air Flow Enhancer
Mounts in Throttle Body and Enhances Air Flow.
- 160 Degree Thermostat
Cooler Engine Operation. Good for Performance applications where a richer
fuel mixture is desired on Performance runs.
- Intake Air Temp Sensor
Relocates Manifold Air Temperature Sensor from under plenum to Intake Air
Duct / Filter. Provides more accurate temperature sensing of Intake Air. Includes
Adaptor Wiring Harness Assembly and Intake Air TempSensor.
- Fan Control Switch
Normally located in RR Head. Turns Fan On at desired temperature:
- 170 Deg F ON, 160 Deg F OFF
- 180 Deg F ON, 170 Deg F OFF
- 205 Deg F ON, 190 Deg F OFF
- 227 Deg F ON, 215 Deg F OFF (OEM)
- Throttle Position Sensor Adjustment Tool
Connects between Throttle Position Sensor and Wiring Harness Connector. Allows
setting Throttle Position Sensor Voltage to insure optimum performance. Includes
Instructions.
- 50mm Throttle Body
Enhances Top End Performance without sacrificing low end torque. (Exchange
Program available)
- Performance Camshafts
FIS has performance cams in stock. These cams provide optimum street performance
for TPI and LT1 Engines. These are street cams not racing cams. They render
good idle and driveability while providing excellent performance. A slight
lope can be detected when idling. A trained ear will know this is not a stock
cam.
- 1985-1986 TPI Engines with flat tappet hydraulic lifters
- 1987-1992 TPI Engines with Roller Hydraulic lifters
- 1992-1994 LT1 Engines with Roller Hydraulic lifters
- 1995-1996 LT1 Engines with Roller Hydraulic lifters
- Polishing
Polishing of Intake Manifold, Plenum, Intake Tubes, Aluminum Extension and
Water Outlet.
- Injectors - Port Injection
We stock Lucas Disc Type Performance Injectors. Avaliable in these sizes:
18 Lbs/Hr - Set of 8 16 Ohms
24 " " 16 Ohms
28 " " 16 Ohms
35 " " 16 Ohms
52 " " 2.4 Ohms*
*Cannot be used with stock ECM's
- NO VATS Chips
All TPI ECM's. Bypasses requirement for resistor type Passkey.
- Chrome Plated FIS Logo Throttle Body Cover Plate
- OEM Accessory Mounting Brackets
Serpentine Accessory Mounting Brackets and bolts for alternator, generator,
power steering pump, (A.I.R Pump optional), Water Pump Pulley, Crank Shaft
Pulley, Belt Tensioner, Support braces and serpentine belt.
NOTE:This kit is required for all 1988 - 1996 Chevy/GMC TPI Truck retrofits.
Same setup as 88-92 Camaro /TA
- OEM Air Filter Assembly
Same as used on 1987-92 TA Canister Filter assembly w/ mounting base and filter.
- Flexible Intake Air Duct
Aircraft Quality Intake Air Duct. Extremely flexible and durable for engine
compartment use.
3.25 Inch Diameter
3.50 "
4.00 "
- Electric Fuel Pumps
Tuned Port Injection & Throttle Body Injection.
60 PSI/30 GPH Frame Mount TPI - CPI
20 PSI/24 GPH Frame Mount TBI
50 PSI/24 GPH In-Tank TPI - CPI
50 PSI/27 GPH In-Tank TPI - CPI
20 PSI/24 GPH In-Tank TBI
- Fuel Filters
- Inline TPI/TBI with threaded fittings
- Inline TPI/TBI with hose extensions
WE HANDLE ALL GM OEM PARTS AT A SIGNIFICANT SAVINGS UNDER DEALER PRICES!
EXAMPLE:
- 1985 Mass Air Flow Burnoff Modules (Used)
Call for Price.
- 1985-1992 Mass Air Flow Sensors (New)
PRICE $326.21
If you're in San Antonio please stop by and say hello, or email
us at fuelinjection@fuelinjection.com.
Copyright © 1996-2005 Fuel Injection Specialties, 11051 Wye Drive, San
Antonio, TX 78217
Phone: 210.654.0774, Fax: 210.654.1444